I have just bought some flexible LED self adhesive tape - product FXLED-CW-2JB and need to cut it to length. Whereabouts on the tape can it be cut? Is it where the soldered joints are?
Answers
This tape can be cut every 50mm. An easy way to do it is to measure 50mm from the end and this will give you the sections that can be cut.
What is the length of tail and does the connection fit your drivers.
Answers
The tape comes with a 1.5m tail with a JB plug at the end
Good afternoon, I am looking to put these under my kitchen units, but I need it to be 600mm, can I buy a 1m and cut it down do size? Also for the plinths at the bottom I need them to be 3800mm, again would I buy the 4m and cut? And lastly what driver would I need for these?
Which is the brightest light, natural white or cool white
Hi, can I purchase corner adapters. I recently purchased 3 lengths. Two of them need to go around a 90C corner.
is this diffused lighting
Hello, is the light diffused? and what is the exact size/ profile as I will have grove under the worktop 10mm x 10mm. Regards
Answers
Hi this product is not diffused as it is only the LED tape supplied. I have attached a link below to the extrusion with the diffuser https://www.lightsupplier.co.uk/led-extrusion-profiles/
I have just ordered the combination you sugggeted - thanks. Would be grateful if you could process this order asap as we need delivery asap as kitchen is being finished off on Monday. Many thanks!
Answers
We will have the order sent this afternoon for you
Hello - I have 3 sections of kitchen wall units I would like to place strip lights under: one section 60cm long, one corner section 80cm and 98cm and one section 107cm long. Would I need to buy 4 x 1m strips and a separate driver for each one or will it work with one 1m strip with driver; two 1m strips with just one driver for both for the corner; and one 1m strip with a driver (even though the cupboard is 1.07 m long? Thank you!
Answers
Hi I think you would be best with 4 x 1m strips and 2 x 8 Watt LED driver & 1 x 20 Watt LED driver, if you need any further assistance please do not hesitate to contact me. Regards, John Atkinson
Hi - does this product come with one (or two) pre-made ends?
Hi, How do you recomend shaping this around 90 degree corners as laid flat. I am looking to return the light strip under a kitchen worktop and understandably it wont bend on its front face. Corner connectors? Cut & Solder? Many thanks
Answers
Hi Christopher, if you order your tape, please state in the notes how many corner connectors you require and the we can supply these for you
Can this be cut to length once received?
Hi, I am looking to use this under kitchen worktop and around plinth boards. Can the item be cut to length as I will need to order 6M but the finished length will be just under that. Thank you
Answers
Yes Christopher this item can be cut to length once received as it is supplied with additional cables