Can these lights be hard wired into a light switch? If so, is there any extra I need to do this? Thank you.
Answers
Yes these lights can be hard wired into the mains
Are they dimmable and if not have you a similar product that is dimmable.
Answers
This item is not dimmable
when linking units together do you need an additional linking connector
Answers
There is a butt connector supplied, but if you need to bridge a gap we also offer linking cables
Where are these manufactured.
Can you tell me which country makes these?
Answers
They are manufactured in China
Can you add to the 2m cable and link to a plug
Answers
Yes the cable supplied is 2 core so you can extend it to the length you require.
I’m looking to install these under a single run of 2 x 800mm wall cabinets. How many striplights, and which size would be best suited allowing for the mains plug connector on one end?
Answers
The best way to do it would be to 2 x 330mm strips on each run
Would it be OK to have a couple of linked striplights permanently left switch on using the integral switch and then control the on/off by a switched live supply ( separate wall switch )?. If this is possible would this be detrimental to the striplight?
Would it be OK to have a couple of linked striplights permanently left switch on using the integral switch and then control the on/off by a switched live supply ( separate wall switch )?. If this is possible would this be detrimental to the striplight?
Hi I need a connecting link cable of approx. 1m, as we have a 600mm unit then 800mm gap, then a further 2 x 600mm units. Is it possible to get a connecting cable that length for these lights. Also, do I need an LED transformer or driver if they are hard wired into the mains thanks Tracey
Answers
The only way to make an extension cable that long would be to cut and splice a link cable to the lenght you require
Hi, I’m looking to install these under a single run of 3 x 600mm wall cabinets in a dark corner. How many (and which size) would be appropriate?
Answers
3 x 550mm would be best suited
Hello, I have 4 fluorescent lights which I am looking to replace with these LED ones. Can I use the existing linking cables and power supply cable or will I need to replace them? Thanks.
Answers
You may need to replace them, it is hard to say with out knowing the model of light.
Power input left or right?
Can the lights be mounted with the power input left or right interchangeably?
Answers
The power can go left or right by turning the light round.
Hi, how hot do these lights run? Cupboards contain food ; bread butter etc, current lights are too hot and heat up the bread.
Answers
These lights emit, little or no heat
These lights emit, little or no heat
What is the dimension of the connector on the link cable? Is the 400mm length the maximum distance between connecting lights or the cable length excluding the connectors?
Answers
Yes 400mm is the maximum extension between lights.
You say the lights can be hard wired directly into the mains. Is this done using an adaptor or connector?
Answers
This would be done via the appropriate wiring into you lighting circuit
If I have 3 units linked together and powered directly to the light ring mains (with a light switch), assuming all the individual switch buttons are set to the on position, can all lights be switched on/off by switching the mains light switch on/off?
What is required to butt two lights together not using the cable link.
Answers
The butt connectors are supplied free of charge with each light
How many units can be linked together to one power point? thanks
One switch for two strips?
If I link two or more of these directly together will one switch turn both strips on/ off? Also, what other product should I consider?
Answers
No the switch will only switch that individual light
Hi, could you tell me the width of these striplights please. (I.e. how far do they protrude from wall).
My kitchen worktops will be white quartz with sparkles, so I'm wanting a diffuse light which won't reflect off the worktop and cause glare. How diffuse is the light from these?
Answers
These lights come with a diffused cover
Could you please advise what the fitting is made from? Plastic or metal?
Are these lights dimmable.
Answers
Unfortunately these lights are not dimmable
What plug connector is this please
I am replacing some lights that are wired behind the cabinets - are they standard two pin connectors (the type for stereo, chargers etc?)
Answers
This come with a specific figure 8 connector, not he same as a stereo or charger though.
Can these lights be wired directly without a plug in cable?
Answers
Yes these lights can be hard wired into the mains
Does On Off switch control all the lights if linked together
If I "daisy chain" 3 light units together with the link cables, does the integrated power switch on the first light unit control all the subsequent lights (ie one switch controls all the units)?
Answers
No the on/off switch will only control that light, not them all if daisy chained together
How much length is added to a fitting when a connector plug is added.
does it come with a plug?
Can I plug it into the mains or do i need a electrician to wire it in?
Answers
A three pin plug can be added tho the wires or it can be wired directly into the mains
Hi What is the depth and height of the product?
Is the power connector LL3 compatible ?
I wish to replace strip lights which have LL3 (female) connectors on the existing wiring. Do your led strips have an LL4 (male) connection ?
Answers
Good morning do you have an image of the connecter? I should be able to see if it matches our connector. Please email me at info@lightsupplier.co.uk and I will come straight back to you.
What is the longest link cable you do, could be looking at upto 4 meters. Thanks
Answers
The long link cable is 1m
I have three questions: What is the beam angle of these lights, are they mountable under a cabinet so that they shine directly downwards and are they dimmable? Many thanks.
Answers
The lights have a 60 degree beam angle They do not shine directly downwards, the way they are fitted they will shine downwards and slightly outwards These lights are not dimmable
Hi, One of the images appears to show two fittings directly connected (end to end). Does this mean that it is possible to directly connect fittings together, creating one longer run (without link cables in-between) and just fed from one end? Many thanks
Answers
Yes this is possible to do with this light fitting
Is there a 120VAC version available?
Answers
Unfortunately we only supply the 240V
What is the IP rating of these enclosures? Are they resistant to kettle steam etc?
Answers
The IP rating of these lights is IP20, yes they would be fine with kettle steam.
longer interconnect cable
Hello, Saw your question and answer section which you said that there is 40 cm interconnected cable between striplights. Is there any longer cable for those striplights (I look for 1 metres or 2 metres interconnected cable)? How much for those? Thanks
Answers
Hi, if you leave a note when you place your order I will make sure your interlinking cables are the length you require
How long are the interconnect link cables?
Answers
The interconnect link cables are 400mm long