LED Fully Linkable Striplights

My electrician said make sure they are 230v will 240v be alright

Does the mans cable come with T5 plug at one end?

I need to change 2No Thorn Arrow Slim T8 fittings in a commercial cooker hood (behind sealed glass panel), what is the maximum ambient temperature for the fittings?

What is the construction, the Thorn are metal framed?

Many thanks
Simon

Is it possible to replace the LED strip, like you would a flourescent tube, rather than buying the whole unit.
I ask as want to compare lighting effect from cool and natural temps led strips.
If so how much are the strips?

kind regards
Greg

I have a JCC linkable light unit that has blown and i want to replace it. Can you advise which of your products is compatible. the unit has JC 83020 batch code 8078 0113 on the back and is approximately 344mm long. i have not been able to find an exact replica on line so suspect it is no longer sold.

How long are the lights guaranteed for

At which end is the cable to the mains located? Is it at the same end as the on/off switch which on your pictures appears to be at the left end if the light is pictured "bulb upward."

Can you turn all linked lights off and on using one light?

How are the lights attached to the cupboard?

How are the lights attached to the cupboard?

Is the light from the warm white quite warm in colour? I want warm white as I dislike cool and blue lighting

Is the measurement given for the light the total length including the power cable fitting eg is 303 for the lamp or the lamp with the cable plugged in? Thanks

What is the difference between these and the ultra slim LED lights please?

Kitchen fitter installed 4 x Lite Tech WL2001-24w using T5 900mm bulb with Howdens kitchen 10 years ago. 3 of the light fitting units no longer work, would these be suitable for fitting in place of the failed ones alongside with the remaining one?

If i link 303mm 5 watt and 526mm 8 watt together how different are light outputs.

If i link 303mm 5 watt and 526mm 8 watt together how different are light outputs.

I have a space of 1800mm between wall and pelmet. Using the button connectors, would a 303+1159+303 fit into this space?

Also, if all three lights are switched to on, these can be controlled by one wall socket (with 3 pin plug wired onto cable) can't they?

Could I daisey chain these lights, if so how long is the cable linking the lights? Also, could I add a motion sensor?
I need 6 lights, approx 2 metres apart, so this would be ideal. Thanks

Hi, i have Smilight under unit flourescents
Model SMI950-B No 950/K26 (24w) & SMI460-B No 460/K27 (13w) I think these are T5?

The plug in connections look the same as these LEDs, can I simply swap the old units for these new ones?

Hi, i have Smilight under unit flourescents
Model SMI950-B No 950/K26 (24w) & SMI460-B No 460/K27 (13w) I think these are T5?

The plug in connections look the same as these LEDs, can I simply swap the old units for these new ones?

I currently have G4 halogen spots under the counters, fed via mains, and controlled via a light switch. How easy would they be to replace with these striplights?

Thanks

I have several under cupboard strip lights but the plastic clips fixed to the cupboards that hold the fittings have broken. Is it possible just to buy these clips, or, if not, do your strip lights come complete with clips?

Do you supply a plug to fit straight in the socket or do they have to be hard wired if not do you sell a strip light with wall plug already fitted

Can I buy link cable from you? in different lengths

Description says they are linkable.
If I have 2 lights across 3 cabinets , do I need to buy a link as well or do they just plug in to each other.

Which of the 3 colours is best for under cupboard task lighting?

Is it possible to control these with a dimmer switch?

I have a series of fluorescent under cabinet lights that I would like to replace. Some are linked to a second light. Some are just single lights. I don’t want to have to change the wiring, which has T5 connectors. Will these work.

I have a series of fluorescent under cabinet lights that I would like to replace. Some are linked to a second light. Some are just single lights. I don’t want to have to change the wiring, which has T5 connectors. Will these work.

Can these units be fitted in the middle of the shelf above or can they only be fitted to the back vertical panel of the unit. Are the fixing plates flexible?

Hi, what is the length of warranty for these products please ?

Does a connector come for each end of the fitting and are they wireable or moulded?

can these be hard wired and controlled from a light switch

Do you have to allow extra length for fitting on top of stated length? Specifically would the 525mm lamp fit in a space 540mm?

How many lumens are the various lamps in this range?

Hi, the item details list a link cable. Di these units come with a flexible link lead included? If so how long is it

Does the strip light come with a connector to join two lights together or do you need an extra connector cable?

Is there a maximum number of these lights that can be linked to work off one plug.? Or is there a maximum wattage they can make combined?

Do these come with the fixtures required to install them beneath cabinets or do these need to be purchased separately?

thanks

Simon

which is the brightest cool, warm or natural white

Hello, I have existing T5 LITE TECH 220-240V 50Hz system, would I be able to swap these for your product without changing the wiring, the old interlinked cables?

Why are all the natural and warm light strip lights rated at 3 watts (the same wattage) regardless of their length?
If the listing is incorrect please advise me of the correct power ratings. Thank you.